Zhoushan Jed Machinery Co.,Ltd

Professional extruder screw product manufacturing and trade service provider in China


Industry NewsNews

The working principle of the injection molding machine is similar to that of the syringe for injectio

The working principle of the injection molding machine is similar to that of the syringe for injection. It is to inject the plasticized molten state (ie, the viscous flow state) into the closed cavity by the thrust of the screw (or plunger). The process of obtaining the product after curing and setting.

Injection molding is a cyclic process, and each cycle mainly includes: quantitative feeding – melt plasticizing – pressure injection – filling mold cooling – mold extraction. After removing the plastic part, the mold is closed again for the next cycle.

According to the plasticizing method, the injection molding machine is divided into a plunger type injection molding machine and a screw type injection molding machine; according to the transmission mode of the machine, it can be divided into hydraulic type, mechanical type and hydraulic-mechanical (linkage) type; Semi-automatic, manual injection molding machine.

Horizontal injection molding machine: This is the most common type. The mold clamping portion and the injection portion are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: short body, easy to operate and maintain; low center of gravity, smooth installation; after the product is ejected, it can be automatically dropped by gravity, easy to achieve fully automatic operation. At present, most types of injection molding machines on the market use this type.

 Vertical injection molding machine: the clamping part and the injection part are on the same vertical center line, and the mold is opened in the vertical direction. Therefore, the floor space is small, the insert is easy to be placed, the mold is convenient to be loaded and unloaded, and the material falling from the hopper can be plasticized more uniformly. However, it is not easy to automatically fall after the product is ejected, and must be removed by hand, which is not easy to achieve automatic operation. The vertical injection molding machine should be used for small injection molding machines. Generally, it is used in injection molding machines below 60 grams, and large and medium-sized machines should not be used.

 Angle injection molding machine: the injection direction and the mold interface are on the same surface, and it is especially suitable for the planar product in which the machining center portion is not allowed to leave the gate mark. It has a smaller footprint than a horizontal injection molding machine, but the inserts placed in the mold are easily tilted down. This type of injection molding machine is suitable for small machines.



Leave a message