برميل برغي عالي الحرارة من مادة PEEK

JED PEEK extruder screws are designed to match your production needs and material properties. PEEK has a high melting point (343°C), and the processing temperature needs to be precisely controlled between 360-400°C. JED screws are selected and designed to be heat-resistant, wear-resistant, and provide sufficient shear force.

Key parameters:

• Screw diameter: Determines output. Screw diameter ranges from 25mm to 150mm.
• Length-to-diameter ratio (L/D): Affects plasticizing effect. For PEEK processing, an L/D ratio of 28:1 or higher is recommended.
• Speed ​​and torque: Require stability and adjustability. Speed ​​range varies from 5 r/min to 600 rpm, and torque density is recommended to be ≥12 Nm/cm³.
• Temperature control: Segmented temperature control accuracy must reach ±1°C. Barrel temperature range is typically 290°C-430°C.

Equipment selection:

• Industrial production: Single screw extruders are mainly used in extruders for cables, rods, profiles, etc.

Don’t forget these details：

• Screw material: Preferred wear-resistant and corrosion-resistant materials, such as 38CrMoala, 9Cr18MoV, etc.
• Special design: Excellent mixing and plasticizing effect, and suitable compression ratio.